Red Hat NETWORK SATELLITE 5.2 - CHANNEL MANAGEMENT Скачать руководство пользователя страница 243

Страница: 243 / 268

Oracle::Availability

231

C.9.2. Oracle::Availability

The Oracle::Availability probe determines the availability of the database from the RHN Satellite
Server.

Field

Value

Oracle SID*
Oracle Username*
Oracle Password*
Oracle Port*

1521

Timeout*

Table C.49. Oracle::Availability settings

C.9.3. Oracle::Blocking Sessions

The Oracle::Blocking Sessions probe monitors an Oracle instance and collects the following metric:

• Blocking Sessions — The number of sessions preventing other sessions from committing changes

to the Oracle database, as determined by the required

Time Blocking

value you provide. Only those

sessions that have been blocking for this duration, which is measured in seconds, are counted as
blocking sessions.

Field

Value

Oracle SID*
Oracle Username*
Oracle Password*
Oracle Port*

1521

Time Blocking (seconds)*

Timeout*

Critical Maximum Blocking Sessions
Warning Maximum Blocking Sessions

Table C.50. Oracle::Blocking Sessions settings

C.9.4. Oracle::Buffer Cache

The Oracle::Buffer Cache probe computes the Buffer Cache Hit Ratio so as to optimize the system
global area (SGA) Database Buffer Cache size. It collects the following metrics:

• Db Block Gets — The number of blocks accessed via single block gets (not through the consistent

get mechanism).

• Consistent Gets — The number of accesses made to the block buffer to retrieve data in a consistent

mode.

• Physical Reads — The cumulative number of blocks read from disk.

• Buffer Cache Hit Ratio — The rate at which the database goes to the buffer instead of the hard disk

to retrieve data. A low ratio suggests more RAM should be added to the system.

Содержание NETWORK SATELLITE 5.2 - CHANNEL MANAGEMENT













































































































































































































































































Результаты поиска

Содержание NETWORK SATELLITE 5.2 - CHANNEL MANAGEMENT

Отзывы:

Бренды по названию

Популярные бренды

Red Hat NETWORK SATELLITE 5.2 - CHANNEL MANAGEMENT, Справочное руководство

Результаты поиска

Содержание NETWORK SATELLITE 5.2 - CHANNEL MANAGEMENT

Отзывы:

Бренды по названию

Популярные бренды