Red Hat NETWORK PROXY SERVER 4.1.0 -, Руководство по установке

Страница: 26 / 44

22 Chapter 4. Installation
Insert only the hostname and port in the form hostname:port, such as
your-gateway.example.com:3128 .
Tip
The installation process affects only the Proxy configuration file:
/etc/rhn/rhn.conf
. The Red Hat Update Agent (
up2date
) configuration file,
/etc/sysconfig/rhn/up2date
, must be updated manually to receive its updates
from another server, such as an RHN Satellite Server.
Finally, you must decide whether to enable SSL using the checkbox at the bottom.
Red Hat strongly recommends that you employ this level of encryption for all traffic
to and from the RHN Proxy Server. To select it, however, you must connect to the
central RHN Servers (which have SSL enabled by default) or to an RHN Satellite
Server or RHN Proxy Server that has SSL enabled. Connection to the central RHN
Servers requires upload of the certificate tar file mentioned earlier. Connection to a
Satellite or another Proxy through SSL requires the CA certificate password used in
enabling SSL on the parent system.
If you choose not to enable SSL during installation, leave this box unchecked and
refer to the SSL Certificates chapter of the RHN Client Configuration Guide to learn
how to obtain this level of security post install. When finished, click continue . If you
enabled SSL and are connecting to a Satellite, the Configure SSL page appears. If
you enabled SSL and are connecting to another Proxy or the central RHN servers,
the Upload SSL page appears. If you did not enable SSL but did enable Monitoring,
skip to the description of the Configure Monitoring page. If you did not enable SSL
or Monitoring, skip to the description of the Install Progress page.