Red Hat NETWORK 3.3 - PROVISIONING, Справочное руководство

Страница: 75 / 130

Chapter 4. Red Hat Network Website 65
6. This kickstart configuration file in turn directs the machine to the location of the installation
files.
7. The new machine is built based upon the parameters established within the kickstart configura-
tion file.
4.4.10.3. Creating Kickstarts
To develop a new kickstart profile, first create a distribution through the
Distributions
page. Refer to
Section 4.4.10.8 Distributions for instructions. Once that is done, return to the Kickstart page and
click
create new kickstart
in the upper-right corner of the page. On the resulting page, enter a name
and label for the profile, select whether it should immediately be considered active, and click the
Select Kickstart Options
button.
On the next page, identify the precise values to be included in the profile, including: bootloader type,
time zone, kickstart network configuration, root password, and partition details. Please note that the
kickstart network configuration value here is different from the network setting on the
Advanced
Options
tab. Refer to the individual tab descriptions for details. Click the
Create Kickstart
button
when done.
When finished with the initial profile, you’re presented with the
Kickstart Details page, which offers
various options for enhancing the kickstart steps. You may clone or delete the profile at any time using
links at the upper-right corner of the page. Use the following tabs to modify the profile.
•
Details
— The default display of the
Kickstart Details
page shows the profile name and label,
as well as these fields: Org Default, which allows you to set this as the primary profile for the
organization, and Comments, or simple notes regarding the profile. In addition, you may click the
view link to see the actual kickstart configuration file generated by RHN. When done, click the
Update Kickstart
button.
•
Options — Collects the precise values to be applied against the kickstart process, including boot-
loader type, time zone, root password, and partition details. Keep in mind, the kickstart network
configuration value here is used by the bootloader to determine the network configuration for the
kickstart process, unlike the network setting on the
Advanced Options
tab, which is used to gen-
erate the kickstart configuration file. The options passed to the bootloader are different from those
needed by the Red Hat installation program to configure the system. When done, click the Update
Kickstart button.
•
Advanced Options
— Accessible through a link at the top of the
Options
tab, this page estab-
lishes the arguments to be included in the kickstart configuration file. These differ from the settings
included on the
Options
tab. For instance, the network setting here defines the parameters of the
Red Hat installation program, while the kickstart network configuration value there affects the
bootloader. As an example, you might need to kickstart a system using eth1 (kickstart network con-
figuration), but eth0 is the primary network interface for the box (as identified in the network field
on this page). When done, click the Update Kickstart button.
•
Packages
— Allows the addition or removal of specific software packages from the kickstart pro-
file. To include packages, enter them in the text field and click the Add Packages button. To exclude
packages, select their checkboxes and click the
Remove Packages
button.
•
Pre — Enables you to edit the %pre script for the kickstart profile. Make your changes and click
the
Update Pre
button.
•
Post — Enables you to include the %post script and other parameters in the kickstart profile.
•
Details
— Allows editing of the %post script and inclusion of other options to be set after initial
kickstart. You may alter individual commands within the script, include the activation key to be
used for registration, and identify the package profile to be used during synchronization.