Red Hat GLOBAL FILE SYSTEM 5.0 Скачать руководство пользователя страница 29

Страница: 29 / 112

LVM Administration Overview

This chapter provides an overview of the administrative procedures you use to configure LVM

logical volumes. This chapter is intended to provide a general understanding of the steps

involved. For specific step-by-step examples of common LVM configuration procedures, see

Chapter 5, LVM Configuration Examples

For descriptions of the CLI commands you can use to perform LVM administration, see

Chapter 4, LVM Administration with CLI Commands

. Alternately, you can use the LVM GUI,

which is described in

Chapter 7, LVM Administration with the LVM GUI

1. Creating LVM Volumes in a Cluster

Creating LVM logical volumes in a cluster environment is identical to creating LVM logical

volumes on a single node. There is no difference in the LVM commands themselves, or in the

LVM GUI interface. In order to enable the LVM volumes you are creating in a cluster, the cluster

infrastructure must be running and the cluster must be quorate.

Note

Shared storage for use in Red Hat Cluster Suite requires that you be running the

cluster logical volume manager daemon (

clvmd

) or the High Availability Logical

Volume Management agents (HA-LVM). If you are not able to use either the

clvmd

daemon or HA-LVM for operational reasons or because you do not have

the correct entitlements, you must not use single-instance LVM on the shared

disk as this may result in data corruption. If you have any concerns please

contact your Red Hat service representative.

For information on how to set up the cluster infrastructure, see Configuring and Managing a Red

Hat Cluster.

2. Logical Volume Creation Overview

The following is a summary of the steps to perform to create an LVM logical volume.

1. Initialize the partitions you will use for the LVM volume as physical volumes (this labels

them).

2. Create a volume group.

3. Create a logical volume.

After creating the logical volume you can create and mount the file system. The examples in this

document use GFS file systems.

Chapter 3.

Содержание GLOBAL FILE SYSTEM 5.0

















































































































Результаты поиска

Содержание GLOBAL FILE SYSTEM 5.0

Отзывы:

Похожие инструкции для GLOBAL FILE SYSTEM 5.0

Бренды по названию

Популярные бренды

Red Hat GLOBAL FILE SYSTEM 5.0, Руководство администратора

Результаты поиска

Содержание GLOBAL FILE SYSTEM 5.0

Отзывы:

Похожие инструкции для GLOBAL FILE SYSTEM 5.0

Бренды по названию

Популярные бренды