Red Hat ENTERPRISE LINUX WS 2.1 -, Руководство по установке

Страница: 60 / 110

50 Chapter 3. Installing Red Hat Enterprise Linux WS
After your computer’s normal power-up sequence has completed, you should see the graphical boot
loader prompt, at which you can do any of the following things:
•
Press [Enter] — causes the default boot entry to be booted.
•
Select a boot label, followed by [Enter] — causes the boot loader to boot the operating system
corresponding to the boot label. (Press [?] at the text mode boot loader prompt for a list of valid
boot labels.)
•
Do nothing — after the boot loader’s timeout period, (by default, five seconds) the boot loader will
automatically boot the default boot entry.
Do whatever is appropriate to boot. If your system was not able to boot properly using GRUB or LILO,
or a third-party boot loader, a boot disk would enable you to properly boot your Red Hat Enterprise
Linux WS system. You should see one or more screens of messages scroll by. Eventually, you should
see a
login:
prompt or a GUI login screen (if you installed the X Window System and chose to start
X automatically).
Tip
If you are not sure what to do next, we suggest you begin with the Official Red Hat Linux Getting
Started Guide (available online at http://www.redhat.com/docs if not included as part of your product),
which covers topics relating to the basics of your system and is an introduction to using Red Hat
Enterprise Linux WS.
If you are a more experienced user looking for information on administration topics, you may find the
Official Red Hat Linux Reference Guide to be more helpful.
If you are looking for information on system configuration, you may find the Official Red Hat Linux
Customization Guide to be helpful.