Red Hat ENTERPRISE LINUX 5.1 DM MULTIPATH, Руководство по настройке и администрированию

Страница: 20 / 38

Chapter 3. Setting Up DM-Multipath
10
create: 3600a0b80001327510000009a436215ec
[size=12 GB][features="0"][hwhandler="0"]
\_ round-robin 0
\_ 2:0:0:1 sdc 8:32
\_ 3:0:0:1 sdg 8:96
create: 3600a0b80001327d800000070436216b3
[size=12 GB][features="0"][hwhandler="0"]
\_ round-robin 0
\_ 2:0:0:2 sdd 8:48
\_ 3:0:0:2 sdh 8:112
create: 3600a0b80001327510000009b4362163e
[size=12 GB][features="0"][hwhandler="0"]
\_ round-robin 0
\_ 2:0:0:3 sde 8:64
\_ 3:0:0:3 sdi 8:128
3.3. Adding Devices to the Multipathing Database
By default, DM-Multipath includes support for the most common storage arrays that support DM-
Multipath. The default configuration values, including supported devices, can be found in the
multipath.conf.defaults
file.
If you need to add a storage device that is not supported by default as a known multipath device, edit
the
/etc/multipath.conf
file and insert the appropriate device information.
For example, to add information about the HP Open-V series the entry looks like this:
devices {
device {
vendor "HP"
product "OPEN-V."
getuid_callout "/sbin/scsi_id -g -u -p0x80 -s /block/%n"
}
}
For more information on the
devices
section of the configuration file, see
Section 4.5, “Configuration
File Devices”
.