Red Hat CLUSTER SUITE - FOR RHEL 4 Скачать руководство пользователя страница 49

Страница: 49 / 74

Chapter 1. Red Hat Cluster Suite Overview

(Relocating a service to its current node — that is, dragging a service to its current node

and dropping the service onto that node — restarts the service.)
The following tables describe the members and services status information displayed by

the

Cluster Status Tool

Members Status Description

Member

The node is part of the cluster.

Note: A node can be a member of a cluster; however, the node

may be inactive and incapable of running services. For example,

rgmanager

is not running on the node, but all other cluster

software components are running in the node, the node appears as

Member

in the

Cluster Status Tool

Dead

The node is unable to participate as a cluster member. The most

basic cluster software is not running on the node.

Table 1-2. Members Status

Services Status

Description

Started

The service resources are configured and available on the cluster

system that owns the service.

Pending

The service has failed on a member and is pending start on

another member.

Disabled

The service has been disabled, and does not have an assigned

owner. A disabled service is never restarted automatically by the

cluster.

Stopped

The service is not running; it is waiting for a member capable of

starting the service. A service remains in the stopped state if

autostart is disabled.

Failed

The service has failed to start on the cluster and cannot

successfully stop the service. A failed service is never restarted

automatically by the cluster.

Table 1-3. Services Status

Содержание CLUSTER SUITE - FOR RHEL 4











































































Результаты поиска

Содержание CLUSTER SUITE - FOR RHEL 4

Отзывы:

Бренды по названию

Популярные бренды

Red Hat CLUSTER SUITE - FOR RHEL 4, Обзор

Результаты поиска

Содержание CLUSTER SUITE - FOR RHEL 4

Отзывы:

Бренды по названию

Популярные бренды