Red Hat CLUSTER SUITE FOR ENTERPRISE LINUX 4.5 Скачать руководство пользователя страница 13

Страница: 13 / 78

Infrastructure components, the High-availability and Service Management components, and

storage.

• Linux Virtual Server (LVS) — Routing software that provides IP-Load-balancing. LVS runs in

a pair of redundant servers that distributes client requests evenly to real servers that are

behind the LVS servers.

You can supplement Red Hat Cluster Suite with the following components, which are part of an

optional package (and not part of Red Hat Cluster Suite):

• Red Hat GFS (Global File System) — Provides a cluster file system for use with Red Hat

Cluster Suite. GFS allows multiple nodes to share storage at a block level as if the storage

were connected locally to each cluster node.

• Cluster Logical Volume Manager (CLVM) — Provides volume management of cluster storage.

Note

When you create or modify a CLVM volume for a clustered environment, you

must ensure that you are running the

clvmd

daemon. For further information,

refer to

Section 6, “Cluster Logical Volume Manager”

• Global Network Block Device (GNBD) — An ancillary component of GFS that exports

block-level storage to Ethernet. This is an economical way to make block-level storage

available to Red Hat GFS.

For a lower level summary of Red Hat Cluster Suite components and optional software, refer to

Chapter 2, Red Hat Cluster Suite Component Summary

Red Hat Cluster Suite Introduction

Содержание CLUSTER SUITE FOR ENTERPRISE LINUX 4.5















































































Результаты поиска

Содержание CLUSTER SUITE FOR ENTERPRISE LINUX 4.5

Отзывы:

Похожие инструкции для CLUSTER SUITE FOR ENTERPRISE LINUX 4.5

Бренды по названию

Популярные бренды

Red Hat CLUSTER SUITE FOR ENTERPRISE LINUX 4.5, Обзор

Результаты поиска

Содержание CLUSTER SUITE FOR ENTERPRISE LINUX 4.5

Отзывы:

Похожие инструкции для CLUSTER SUITE FOR ENTERPRISE LINUX 4.5

Бренды по названию

Популярные бренды