Red Hat CLUSTER FOR ENTERPRISE LINUX 5.0 страница 49 Скачать руководство пользователя

Страница: 49 / 114

1. Click the link of the node to be deleted. Clicking the link of the node to be deleted causes a

page to be displayed for that link showing how that node is configured.

Note

To allow services running on a node to fail over when the node is deleted, skip

the next step.

2. Disable or relocate each service that is running on the node to be deleted:

Note

Repeat this step for each service that needs to be disabled or started on another

node.

a. Under Services on this Node, click the link for a service. Clicking that link cause a

configuration page for that service to be displayed.

b. On that page, at the Choose a taskdrop-down box, choose to either disable the service

are start it on another node and click Go.

c. Upon confirmation that the service has been disabled or started on another node, click the

cluster tab. Clicking the cluster tab causes the Choose a cluster to administer page to

be displayed.

d. At the Choose a cluster to administer page, click the link of the node to be deleted.

Clicking the link of the node to be deleted causes a page to be displayed for that link

showing how that node is configured.

3. On that page, at the Choose a taskdrop-down box, choose Delete this node and click Go.

When the node is deleted, a page is displayed that lists the nodes in the cluster. Check the

list to make sure that the node has been deleted.

7. Configuring a Failover Domain

A failover domain is a named subset of cluster nodes that are eligible to run a cluster service in

the event of a node failure. A failover domain can have the following characteristics:

• Unrestricted — Allows you to specify that a subset of members are preferred, but that a

cluster service assigned to this domain can run on any available member.

• Restricted — Allows you to restrict the members that can run a particular cluster service. If

none of the members in a restricted failover domain are available, the cluster service cannot

Configuring a Failover Domain

Содержание CLUSTER FOR ENTERPRISE LINUX 5.0



















































































































Результаты поиска

Содержание CLUSTER FOR ENTERPRISE LINUX 5.0

Отзывы:

Похожие инструкции для CLUSTER FOR ENTERPRISE LINUX 5.0

Бренды по названию

Популярные бренды

Red Hat CLUSTER FOR ENTERPRISE LINUX 5.0, Руководство по настройке

Результаты поиска

Содержание CLUSTER FOR ENTERPRISE LINUX 5.0

Отзывы:

Похожие инструкции для CLUSTER FOR ENTERPRISE LINUX 5.0

Бренды по названию

Популярные бренды