Red Hat Application Server Скачать руководство пользователя страница 244

Страница: 244 / 296

236

Chapter 32. Clustering with JOnAS

This architecture provides:

•

Load Balancing: Requests can be dispatched over a set of servers to distribute the load. This im-

proves the “scalability” by allowing more requests to be processed concurrently.

•

High Availability (HA): having several servers able to fulfill a request makes it possible to ensure

that, if a server dies, the request can be sent to an available server (thus the load-balancing algo-

rithm ensures that the server to which the request will be sent is available). Therefore, “Service

Availability” is achieved.

•

Failover at Servlet/JSP Level: This feature ensures that, if one JSP/Servlet server goes down, an-

other server is able to transparently take over (that is, the request will be switched to another server

without service disruption). This means that it will not be necessary to start over, thus achieving

continuity.

However, failover at EJB level is not available. This means that no State Replication is provided. The

mechanism to provide failover at EJB level is under development and will be available in a coming

version of JOnAS.

32.2. Load Balancing at the Web Level with mod_jk

This section describes how to configure Apache, Tomcat, and JOnAS to run the architecture shown in

the following illustration:

Figure 32-2. Load balancing at web level with mod_jk

Содержание Application Server









































































































































































































































































































Результаты поиска

Содержание Application Server

Отзывы:

Бренды по названию

Популярные бренды

Red Hat Application Server, Руководство пользователя

Результаты поиска

Содержание Application Server

Отзывы:

Бренды по названию

Популярные бренды