Red Ember Liv 62563, Руководство пользователя, Страница: 6 / 17

6
1
Assemble the left side of the fire table base. Select one leg
E
and one leg
F
and attach to either end of a Side Panel
C
using
four bolts
L
. The drilled tab at the top of each leg should face the
same direction, toward the outside of the Side Panel . Do not fully
tighten the bolts until the entire base is assembled.
Hardware Used:
L
M6x12 Bolt x 4
2
Select Right Panel
D
and locate the two extra drilled holes
close together on one long side. Orient the panel so these
two holes face DOWN. Using the two remaining legs
E
and
F
, repeat the above sequence to assemble the right side of the
fire table base. Make sure the drilled tabs both face toward the
outside of the Right Panel .
Hardware Used:
L
M6x12 Bolt x 4
3
Complete the base. Making sure that all Panels face OUT,
connect the last Side Panel
C
to the assembled sides using
four bolts
K
as shown. Connect the Front Pane l
B
using four
bolts
L
to complete the base. Now fully tighten all bolts .
Hardware Used:
L
M6x12 Bolt x 8
ASSEMblY
PREPARATION
Before beginning assembly, be sure to empty contents of carton and make sure all parts are present.
Place all parts on a soft, level surface for assembly.
Estimated Assembly Time: 60 Minutes | DO NOT over tighten hardware!
1
F
D
G
E
H
I
C
B
2
3