PRODUCT:
PHOTOCELL
PRODUCT CODES:
PC10A & PC10AH
BOX CONTENTS -
PC10A - PHOTOCELL KIT
PC10AH - PHOTOCELL HEAD
SPECIFICATION
Dimensions:
PC10A - L: 130 x
Ø:
80mm
PC10AH - L: 64 x
Ø:
80mm
Material:
PC
Working
Temperature:
-40° - 70°C
Included:
Photodiode Sensor
Additional
Information
Max load 1000W LED or Resistive
SAFETY WARNING
•
The installation should be carried out
by a qualified electrician in compliance
with the current edition of the IEE
Wiring Regulations.
•
Prior to installation, carry out the
necessary risk assessment considering
the people who could be at risk, the
level of risk and the precautions
required to control the risk
•
Ensure that the circuit supply is
isolated either by the circuit supply
fuse being removed or the applicable
circuit breaker being turned off before
installation or any maintenance.
•
Check the total load on the circuit
ensuring the luminaire does not exceed
the rating of the circuit cable, fuse or
circuit breaker.
•
Long-term use and voltage fluctuations
can reduce the life span of the fitting.
•
If the fitting incorporates control gear,
ensure careful sizing to avoid instances
of nuisance tripping of the protective
device used in the installation.
•
Follow the provided installation
instructions, using the fixings supplied
or recommended.
•
Keep out of reach of children.
IP65
1
YR
GUARANTEE
INSTALLATION
INSTRUCTIONS
T: 0800 195 0006
Red Arrow Electrical Distribution
Cortonwood Drive, Brampton,
Barnsley, S73 0UF
redarrowelectrical.co.uk
PAGE 1 (FRONT PAGE)
G U A R A N T E E
This product is guaranteed for a period of 1 year from the date of
purchase. The guarantee is invalid in the case of improper use, tampering,
removal of the Q.C. date label, installation in an improper working
environment or installation not according to the current edition of the
I.E.E. Wiring Regulations (BS7671).
The guarantee is also invalidated if the luminaire has been insulation
tested. Should this product fail during the guarantee period it will be
replaced free of charge, subject to correct installation and return of the
faulty unit. We do not accept responsibility for any installation costs
associated with the replacement of this product. Your statutory rights
are not affected. We reserve the right to alter specifications without prior
notice.
M A I N T E N A N C E
•
This fitting will require routine cleaning if used in adverse (dust, paint,
welding, oils etc) environments. Do not use solvents, aggressive detergents
or abrasives.
•
When this fitting comes to the end of it’s life or you choose to replace it,
please do not dispose of it with your normal household waste. Please
recycle where the facilities exist, check with your local authority for suitable
options.
PAGE 2 (TWO - INSIDE DPS)
240V
