110V LED WORKLIGHTS WITH TRIPOD
M O D E L S: G LW118, G LW218
INSTALLATION INSTRUCTIONS
Red Arrow Trading Ltd
Elsworth House, Herries Road South
Sheffield, S6 1QS
Tel
: 0800 195 0006
Fax
: 0870 195 0006
Web
: www.redarrowtrading.com
G U A R A N T E E
This product is guaranteed for a period of 3 years from the date of purchase.
The guarantee is invalid in the case of improper use, tampering, removal
of the Q.C. date label, installation in an improper working environment
or installation not according to the current edition of the I.E.E. Wiring
Regulations (BS7671).
The guarantee is also invalidated if the luminaire has been Mega tested.
Should this product fail during the guarantee period it will be replaced free
of charge, subject to correct installation and return of the faulty unit. We
do not accept responsibility for any installation costs associated with the
replacement of this product. Your statutory rights are not affected. We
reserve the right to alter specifications without prior notice.
M A I N T E N A N C E
•
This fitting will require routine cleaning if used in adverse (dust,
paint, welding, oils etc) environments.
•
When this fitting comes to the end of it’s life or you choose to
replace it, please do not dispose of it with your normal household
waste. Please recycle where the facilities exist, check with your
local authority or retailer for suitable options.
I N S T A L L A T I O N I N S T R U C T I O N S
1.
Remove the tripod from the box and loosen the screw at the bottom to be able to open out the three legs. Once opened out, place on a flat surface and
tighten the screw back up.
2.
Adjust the height of the tripod by twisting the central pole. once you have the height you require, twist to tighten it back up.
3.
Fix the LED head(s) on the top of the tripod by using the screw(s) provided, twist the LED head(s) to the position you want and fully tighten the screw(s).
4.
Check that the tripod is stable and has a solid footing. Ensure that the cable is not near any sharp objects that could cause damage to it and make sure the
plug is protected against rain and moisture.
5. Connect the plug to a suitable power supply and make sure it is working correctly.
6. When the tripod is not in use, use the hooks to safely store the cable.
