Recsea WHOM-TF3/4, Руководство пользователя

Страница: 6 / 10

※
Please perform proper housing O-RING MAINTENANCE prior to installation.
※
Please conduct the following operations in a clean area with low humidity and dust.
1. Check camera settings, battery is charged and media storage capacity is sufficient.
2. Slowly and carefully install camera making sure camera does not hit housing's internal
controls. Gently push camera forward into housing to make sure it is properly seated. If
the camera is not seated correctly, buttons, dials, and levers may not work properly.
3. After performing O-ring Maintenance, carefully close back cover making sure nothing is
caught between the Back Cover O-ring and housing body Contact Surface.
REMOVING CAMERA
CAUTION! After use in water, water will remain in seams between housing, back cover and
Lip-hinge Groove. Wipe any water off housing with a soft dry towel to prevent water from
falling on camera.
1. Open and remove Back Cover as instructed in OPENING AND CLOSING THE BACK
COVER.
2. Tip Housing backwards, gently sliding camera out of housing.
HANDLING PRECAUTIONS
The Lens Port lens is manufactured using hard coat acrylic. When cleaning use a clean soft
cloth taking care not to scratch it.
INTERNAL AND EXTERNAL STROBE
※
For heavy strobes and lights please use optional Grip & Tray Assembly and compatible
connector.
※
Use the Strobe Mask-External Strobe Connection Mount to connect external strobe fiber
-optic cable or plug.
Connecting fiber optic cable for external strobe use:
CAUTION! Store Strobe Mask-External Strobe Connection Mount and Screw in a secure
place so as not to lose them.
1. Using the Strobe Mask-External Strobe Connection Mount Screw, attach the Strobe Mask
-External Strobe Connection Mount by screwing it into the Screw Socket provided.
2. Insert bear fiber-optic cable (INON) or plug (SEA&SEA) into sockets provided.
※
Two (2) Tripod Sockets are provided at the bottom of the housing for use in attaching
Seatool/Recsea genuine tray and grip assemblies.
4.