Recsea RVH-X1000, Руководство пользователя

Страница: 6 / 13

5. To CLOSE, close Lens Port.
6. Place Port Latch over the Latch Groove at at the base of the Lens Port.
7. Push Port Latch down making sure it is firmly locked into place and Lens Port is closed.
INSTALLING CAMERA
CAUTION! Before using, please be sure to test the housing (without camera) in a bucket of
freshwater. After use in salt water, rinse thoroughly in a bucket of fresh water without fail,
pressing all buttons several times to flush out salt deposits and other contaminants. Allowing
saltwater and contaminants to dry on housing can damage functions and O-ring. Clean with
fresh water only, using a soft, dry cloth to wipe away water.
※
Please perform proper Housing and Port O-RING MAINTENANCE prior to installation.
※
Please conduct the following operations in a clean area with low humidity and dust.
1. Check camera settings, battery is charged and media storage capacity is sufficient.
2. Slowly and carefully install camera, pushing it to the rear of the housing until it stops. If
the camera is not inserted correctly buttons may not work properly.
3. After performing proper O-ring and O-ring Contact Surface Maintenance, carefully close
Lens Port as instructed in OPENING AND CLOSING LENS PORT above.
4.