Commissioning
5
BAL_SD_R62_EN_2V3_BLA_121-006454377
23 / 30
→
ALARMING
→ General
→ PAutoReset
ON
Selection to switch automatic reset ON or OFF when
alarm is no longer active
→ TTechAlarmDelay
30
(sec)
Delay time to active alarming in case of a technical
alarm
→ TLedIntervall
1
(ds)
Traffic lights blinking interval during alarm
→ TMatAlarmDelay
60
(sec)
Delay time when alarm is from door drives or faulty
sensor
→ PEntranceFlash
0
Flashing light on the entrance indicates the type of
alarm:
0
= all alarms
1
= intrusion
2
= tailgaiting
3
= technical alarm
4
= sabotage
→ TPubOpenDelayTech
5
(ds)
Delay time opening public door in case of technical
alarm
→ TSecOpenDelayTech
5
(ds)
Delay time opening secure door in case of technical
alarm
→ Buzzer
→ TTechAlarm
10
(min.)
Time between repeating signaling with the buzzer when
technical alarm is still active
→ TOnTime
5
(ds)
Time the buzzer is on
→ Public door
→TWrongPos
30
(sec)
Delay time alarming public door does not open or close
→ TNotOpNotCl
10
(sec)
Delay time alarming while public door is between open
and closed position
→ TForcedOpen
10
(ds)
Delay time for alarming when the public door is closed
and is no longer sending an opening impulse to the PLC
→ Secure door
→TwrongPos
30
(sec)
Delay time alarming secure door does not open or close
→ TNotOpNotCl
10
(sec)
Delay time alarming while secure door is between open
and closed position
→ TForcedOpen
10
(ds)
Delay time alarming when the secure door is closed and
is no longer sending an opening impulse to the PLC
→
LIGHT
→ PPowerSave
ON
Power save mode activated ON or deactivated OFF
→ TPowerSave
30
(min.)
Delay time before light is switched off when door is not
used
→ TOffDelay
20
(ds)
Delay time to switch off the lights (when changing the
operating mode)
