record-USA 5100 Series Скачать руководство пользователя страница 3

 

3/6/06 

3

Service Availability

 

 

Automatic door products are distributed through a nationwide network of authorized automatic 

door suppliers for sales, installation, and service. 

 

Should you need service on your door system, consult the respective door manufacturer or its 

authorized representative. 

 

Compliance with Safety Standards

 

 

Your door system was designed to the latest operating and safety standards.  In order to ensure 

the continued safe operation of your door, it is important that: 

 

     -  Your door system be maintained in compliance with the standards of the industry. 

 

     -  Proper decals and labels be applied and maintained on your doors.  If decals are removed 

or cannot be read, request labels to be replaced when calling for service. 

 

     -  Automatic doors should be checked by an AAADM certified inspector at least annually. 

 

AAADM

, the American Association of Automatic Door Manufacturers, has established a 

program to certify automatic door inspectors.  Through this program, the inspectors are 

trained to check your door systems for compliance with the appropriate version of the 

American National Standards Institute standard ANSI/BHMA A156.10. 

 

What You Should Know

 

 

Be sure that an automatic door supplier has provided the following for each door: 

 

1. 

Instruction on how to conduct the 

Daily Safety Check

 

*

(by walk-through example). 

 

2. 

Location of function switches and instruction in their use. 

 

3. 

Circuit breaker or main power disconnect location for each door system. 

 

4. 

Number to call for service or questions about your system if you are uncertain of any 

condition or situation. 

 

5. 

AAADM inspection form or a work order signed by an AAADM certified inspector. 

 

6. 

A completed Annual Compliance Inspection label, located at the bottom of the Safety 

Information label affixed to the door. 

 

7. 

Warranty information for each door. 

 

Note

:  If there are any problems, or if you are unsure about the safe performance of the door, 

discontinue door operation immediately 

and secure the door in a safe manner. Call 

your authorized automatic door professional for repairs. 

 

*

Note

:    AAADM Daily Safety Check videos are available.  Contact an automatic door supplier 

or AAADM.   

 

Automatic sliding doors are installed in a variety of combinations.   

 

 

Single or Bi-parting  

 

Sliding Door Swings out in emergency with fixed sidelite 

 

Sliding Door Swings out in emergency and sidelite also swings out 

 

One-Way Traffic or Two-Way Traffic 

 

Activated by Floor Mat, Sensors, or Push Switches 

 

They always require a Safety Zone to cover the area in or near the door travel.  

 

Содержание 5100 Series









Отзывы: