background image

15

10. Assembly of the Optional DML305/L Extension 
Support and DML305/E Bed Extension - cont

Assembly of the DML305/L Extension Support

Attach the upright column to the base using two M10 x 80 mm bolts, 
ensuring that there is an M10 washer between each bolt and the upright 
column and another M10 washer between each M10 nut and the base, 

Fig.10.1

.

Attach the upright plinth to the upright column using two M10 x 80 mm 
bolts to the desired height, making sure that the overhang of the plate on 
top of the plinth is facing towards the inside of the legstand. Also ensure 
that there is at least one hole space between the two bolts and that both 
bolts pass through the upright column, 

Fig.10.2

.

Attach the female cross brace to the upright column of the leg extension 
using two M10 x 80 mm bolts, 

Fig.10.3

.

Attach the male cross brace to the main leg stand using the same bolts 
which hold the either the male or female cross brace in place on the main 
leg stand, 

Fig 10.4

. The Leg extension can be mounted to either side of 

the main leg stand, depending on which way round the lathe was originally 
attached to the main leg stand.

Set the distance between the main leg stand and the new leg extension 
to approximately 640 mm (25”) so that the bed extension can sit on the 
leg extension safely. Hold in place by attaching the two M10 x 25 mm set 
screws in the female cross brace, 

Fig 10.5

.

640 mm

Main Leg stand

Male cross brace

Main leg stand

Leg stand extension

Hole for set screw

80 mm M10 bolts

Base

Upright column

Female cross brace

Upright Plinth

Upright column

Upright plinth

80 mm M10 bolts

80 mm M10 Bolts

Fig.10.1

Fig.10.2

Fig.10.3

Fig.10.4

Fig.10.5

Содержание DML305





























Отзывы: