11
8. Assembly - cont.
Fig.8.4
Fig.8.5
5. Position the motor and housing (A) on top of
the frame with the four threaded studs passing
through the corresponding holes on top of the
frame. Secure in position using the knobs (P) and
washers (J). See fIg 8.4.
6. Thread the butterfly nut (K) onto the bag
support arm. Place the spring washer (M) and
washer (N) on the bag support arm and screw
the bag support arm to the motor and housing,
Fig 8.5. Lock the arm in position using the
butterfly nut.
A
J
P
K
M
N
CX2000 Manual 3.0.indd 11
19/08/2013 09:48
