Record Power BM16 Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 18

Record Power BM16 Скачать руководство пользователя страница 3

Dear Customer,
Thank you for investing in a RECORD POWER

®

product, which has been designed to give you years of satisfying service.

Please do not forget to fill in and return your guarantee card, this will assist us in providing you with prompt and appropriate after sales service. (This does not
affect your statutory rights).

PURPOSE OF THIS MANUAL

This manual serves to give details of Specification, Health & Safety, Installation & Assembly to help you get the best from this product.

RECORD POWER AND THE ENVIRONMENT

Considerations of environmental issues are an integral part of the design, production and other associated aspects of this product, and all reasonable environmentally
friendly options have been adopted throughout.
Users are advised to consider environmental issues associated with the use of this product, particularly when considering workpiece material. Confirmation of
sourcing from well-managed forests is advisable whenever practically possible.

WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT (WEEE) REGULATIONS

The WEEE regulations aim to encourage reuse, recycling and recovery of electrical and electronic waste. The document outlining the WEEE guidelines is available
at http://www.dti.gov.uk/sustainability/weee.

1. Introduction

2

3

«
1
2
3
4
5
...
»

Содержание BM16



















Отзывы:

Нет отзывов