11
©RECONYX, Inc.
Setup & Programming
With the SD card inserted in the camera, turn
your camera on using the
On/Off
switch.
NOTE:
If this is the first time you’ve used
your camera, it will automatically
display the
Date/Time
setup change
option, beginning with
Enter Year
.
Press the
<<
and
>>
buttons to scroll through settings for each step (year, month,
day, hour, minute, temperature type and battery type); pressing the
OK
button
after each step is entered correctly.
TIP:
After the initial setup options are set, your camera is ready to take pictures.
All you need to do is make sure your camera has a card and batteries installed,
mount it to a tree, turn it on, close it up, and walk away. The camera will
automatically arm and start taking pictures (with default settings) in two minutes.
Default Settings
Your RECONYX™ HyperFire
TM
camera comes pre-programmed with factory
default settings. By default the SC950 will take 3 pictures per trigger with a 1
second pause between pictures and no delay between triggers. The SM750 will
take 5 pictures in RapidFire mode with no delay between triggers.
If you wish to change your camera’s settings you can do so easily in the field at
any time. Changes are easily made using the control buttons and the LCD
display. Once you make selections, they are retained by the camera – even
when the camera is off and the batteries are removed – so that you don’t need to
make selections again unless you want to change something.
NOTE:
Throughout the manual, default camera settings are shown in
RED
CAPITAL
letters.
NOTE:
The Security Scheduling Software is used to set up the
weekday/weekend schedules for the Security Cameras. By default
they are always on. See the Scheduling software help file in the
software for more information.
