Poor Sound Quality ( Distortions ):
The speakers are overloaded, therefore turn down the volume level and
check the volume control positions.
No Stereo Sound And A Weak Bass:
Speaker cables (+) and (-) are mixed up, unit wired out of phase.
This unit is designed for negative ground 12V DC operation only
Avoid installing the unit where:
- It would be subject to high temperatures, such as from direct sunlight or hot
air from the heater.
- It would be exposed to rain or moisture.
- It would be subject to dust or dirt.
If your car is parked in direct sunlight and there is a considerable rise in
temperature inside the car, allow the unit to cool off before operation.
When installing the unit horizontally, be sure not to cover the heatsink fins
with the floor carpet.
If this unit is placed too close to the car radio, an interference may occur. In
this case, separate the amplifier from the car radio.
This power amplifier employs a prote ction circuit to protect the transistors
and speakers if the amplifier malfunctions. Do not attempt to test the
protection circuits by covering the heatsink or connecting improper loads.
Do not use the unit with a weak auto battery as its optimum performance
depends on a normal battery supply voltage.
For safety reasons, keep the volume of your car audio system moderate so
that you can still hear normal tra ffic sounds outside your car.
If the product contains desiccant, do not eat, avoid touching the liquid, and
keep away from children.
MONO POWER AMPLIFIER
TROUBLE SHOOTING
DI550.4-DI600.1