TonerRefillKits.com
RechargX™ RX207
Mon - Fri 8am - 5pm ET © 1995-2011 ReChargX™, EmptyX, TonerRefillKits and TonerRefillKits.com, the TonerRefillKits logo, the
2011.05.17
800.527.3712 or 352.343.7533 ReChargX™ and EmptyX logos are trademarks owned by TonerRefillkits, LLC. All rights reserved.
Page 4 of 7
Step 6: Clean the Area Around the Toner
Hopper Plug Before RePlugging
Unfold the yellow/orange “toner grabber” cloth
from the ReChargX™ RX207 Premium Print Toner
Refill Kit and stretch it along both dimensions (it
will stretch considerably in one dimension and
not the other).
Stretching the yellow/orange toner grabber cloth
activates the toner retaining substance that is
embedded within the cloth.
You will use this cloth to clean the outside of the
toner hopper plug, as shown in figure 7.
(Note: Only use the toner grabber cloth on the
exterior of the toner cartridge around the toner
hopper plug area. Do not use the cloth to clean
any of the internal components, the developer
roller or the imaging drum.)
Step 7: Plug the Toner Hopper Hole with
the Toner Hopper Plug
Lower the plug down into the toner hopper hole
and press firmly around the entire plug to ensure
it securely sits inside the cartridge, as shown in
figure 8.
Step 8: Orient the Toner Cartridge
Orient the toner cartridge so the top of the
cartridge is laying on the work surface and the
underbelly is facing upward.
In this orientation, the cartridge reset chip will
be located on your left side, as shown by the
white arrows in figure 9.
Figure 7: Clean the toner hopper hole
Figure 8: Plug the toner hopper hole
Figure 9: Orient the toner cartridge
î í
