OPERATION & CONTROL
Air Handling Unit
Temovex Blue 4
REC Indovent AB, Box 37, SE-431 21 Mölndal, Sweden
|
+46-31-675500
|
www.rec-indovent.se
16
Display actual temperature.
Press the navigation button once more (within 10 sec) and the set point symbol will be turned off. The indoor
temperature symbol will start blinking and the display shows the actual value. At this point, the setting buttons
have no function. When no buttons are pressed for 10 seconds, the display will again show the set point.
Display outdoor temperature.
Press the navigation button once more (within 10 sec) and the indoor temp. symbol will be turned off. The
outdoor temperature symbol will start blinking and the display shows the outdoor temperature. At this point, the
setting buttons have no function. When no buttons are pressed for 10 seconds, the display will again show the set
point.
Fan speed:
Press the navigation button once more (within 10 sec) and the fan symbol, the fan speed symbol as well as MAN
or AUTO will light up. The fan symbol starts blinking and the fan speed can be changed to desired position (min,
normal, boost or max) with the setting buttons. The positions correspond with the possible settings in menu
choice MODE on the main display. A change made on the remote panel will also be seen on the main display.
The symbol MAN tells that the unit works in a different mode than AUTO.
The unit may run at a fan speed between minimum and normal, or between normal and boost flow, due to
boosting or safe mode. The symbol fan speed shows actual fan mode as follow:
·
Fan speed zero
no box is lit
·
< normal mode
the box leftmost is lit
·
= normal mode
the two boxes leftmost are lit
·
> normal mode but < = boost mode
the three boxes leftmost are lit
·
= max mode
all boxes are lit
If the unit has been put in manual mode on the main display, nothing will happen to the fan speed if you try to
change it on the remote panel. The symbols in the menu MODE on both the remote panel and the main display
will change, but the fans
’ speed will not change until you shift from manual mode to AUTO on the main display.
The new settings will be saved when the navigation button is pressed, or when no buttons are pressed for 10
seconds. The main display again shows the set point.
Kitchen/Stove.
The symbol Kitchen/Stove will light up when the unit is placed in stove mode or kitchen mode.
Away mode/ECO-mode.
By pressing the "away" button, the "at home" symbol will be turned off and the unit will change to ECO mode.
Turn off ECO mode by pressing once more..
The function requires that ECO is configured on the main display.
By-pass damper.
The By-pass symbol will light up when the by-pass is open > 0 %.
Cool.
COOL will light up if cooling is configured at the main display and the cooling-valve is open > 0 %.
Heat.
HEAT will light up if the regulator is calling > 0 % heat.
Alarm.
SERVICE will light up if there are unacknowledged alarms.
Off.
OFF will light up if the unit is turned off.
Содержание G10125
Страница 19: ...19 Notes...
