REBOTEC /
BA-Nr.: 02.07.086/2022-05-A01
- 6 -
EN
•
For more detailed information, please see the re-
processing instructions (02.12.156) and the
maintenance instructions (02.11.150).
•
The documents can be downloaded from the fol-
lowing link.
▪
•
When used as intended, the product has a lifetime
of 5 years. The effective lifetime may vary depend-
ing on the frequency and intensity of use and the
general condition.
8 Scope of delivery
•
1 Shower/toilet wheelchair, self-propelled
2x Height adapters
•
1 User manual (02.07.086)
•
1 Allen key
The reprocessing and maintenance instructions can
be ordered or viewed and downloaded at
9 Setting up for use
•
The product has been carefully inspected in the
factory for freedom from defects and complete-
ness. Please check the product for any possible
damage which may have occurred during transport
and for completeness of the scope of delivery upon
receipt. Assembly or adjustment shall be carried
out by the specialist dealer.
9.1 Folding down the footrests
•
Turn (1) the footrests forwards until they engage
automatically. Fold (2) the footrests down. Adjust
the height of the footrests if necessary.
9.2 Adjusting the footrest height
•
The footrest height can be adjusted in 7 positions.
Loosen and remove the screws on the side of the
footrest using an Allen key (SW 5). Select the ap-
propriate height level (1-7) and screw the footrest
back in place. Make sure that the screws are firmly
tightened!
9.3 Attachment of height adapter for
footrest
•
To reduce the space between footrest and seat
even more, an additional height adapter can be at-
tached between the front wheel insert and the
swivel arm of the footrest.
•
The height adapter can be installed either below or
just above the frame strut.
•
When installing the
adapter, make sure that
the recess (1) faces up-
wards so that the footrest
can latch in properly.
9.4 Assembling the
backrest
•
The armrests must
be swivelled backwards for
mounting the backrest.
•
Put the backrest on
the tubes and then swivel the
armrests forward until the
bolts engage.
9.5 Mounting the backrest cushion
•
The backrest cushion is attached to the cross strut
of the backrest. (1&2)
Max
Min
1
1
2
Max
