Version Number: RBM1550-20210414A1
21
5. Install wire spool
0.030”(0.8mm)/0.040”(1.0mm)diameter
4”
（
100mm 1kg
）
wire spool
6. Set drive roll
Face the side marked 0.030” away from the machine.
Remarks:
1. There are two grooves on one wire feed wheel, one side is 0.030” (0.8mm) and the other side
is 0.040” (1.0mm) to match the corresponding wire diameter.
2. For the installation of the wire feed roller, please see the mark "2'" in the picture
5.3 LIFT-TIG mode
Reboot RBM-1550 for thin plates with higher welding process requirements or welding with higher
process requirements, especially for stainless steel welding, you can use the LIFT TIG mode, which requires
the use of pure argon.
