REBER srl - Via Valbrina, 11 - 42045 Luzzara(RE)
tel. +39 0522 976153 - fax. +39 0522 976096
– Reg. Imprese Trib.Reggio Emilia n.10.000 – P.Iva 00131370355
The informations included, will allow you to use the machine in perfect safety conditions and to preserve performances
WARRANTY
The suppplier restricts hisself to repare or replace all components should have constructions faults in the first 24 months
from the selling date. Components subjected to normal consumption
are excluded from warranty. The costumer must
indicate to the supplier, in order du benefit from the warranty, the faults pointing out, the serial number of the machine,
the purchase date (from invoice), and furthermore he will have to send the faulty part at hios charges for reparation or
replacement. The supplier filfils completely his warranty obligations by the reparation or replacement of the faulty
piece. If reparation is requested ehere the machine is installed, all charges regarding, labour, trip and hotel fees of the
technicians will be entirely at the purchaser charges. The damage due to an inappropriate use, missed maintenance,
tampering are not included in the warranty.
WARNING AND RULES
Read carefully all instructions before using the machine, taking particular care of the paragraphs with the safety and danger symbols.
Remove the plug before all maintenance and cleaning operations
WARNING FOR USE
The manufacturer declines all responsabilità in cas of improper use of the machine
-
Check the power cord periodically, if damaged replace it with a power cord same as the one fournished;
replacement must be done by qualified technician.
-
Do not immerse the electric parts in water or other liquids for cleaning
-
Do not remove the plug from the socket gripping the power cord
-
Do not use extension cables
-
Do not use the machine with wet hands or bare feet
-
Disconnect the plug from the soket before cleaning or maintenance
-
The product’s input voltage is 220-240V~ 50Hz
，
please check it before using.
-
The product belong to
Ⅱ
type electrical equipment.
-
If the product need to be repaired
，
please contact to our customer service department
，
or go to directly to our
maintenance point to repair.
，
do not dismantle it by yourself, in order to avoid danger.
-
Please disconnect the power when dismantle or timing any parts of the product.
-
Please check power line,plug, juicing net, screw and other small parts in case if they are broken before using.
Please stop using when found it is broken. Please contact our customer service department. Do not dismantle it
by yourself, in order to avoid danger.
-
Be sure that the removable parts were setted well before power on. Feeding tube and feeding
-
tube lid must be fully tighten, in order to avoid juice leakage and cover abnormal fall off when it is
-
working condition.
-
With brainpower safety chip, the product will stop automatically when working for 20 minutes, please stop
using for 20 to 30 minutes, and using it when machine is cooling. It will extend the working life of the product
by this way.
-
If there are some overload or block up during working time, It will stop automatically, with a warning
tone”di”. It can be used again after the tone. If there are still stock up, we suggest to clean the food in the
feeding tube and use again then.
-
The food should be cut into patches, so that they can be put into easily. Food with nucleu, seed. Pachydermia
or shell should be cleaned first, and process them after that.
-
This product is not suitable for the food with many
fibres.
Like sugarcane and so on, They will be easily stock
up, and the small parts will broken, and effect the product’s life.
-
Do not push so hard when put the food inside, just cutted size will be better.
-
Strictly prohibit to put hands or hard stuff inside the feeding tube and touching the screw parts when ithe
product is working. In order to avoid injured or broken the products, especailly the old ones and children
-
Strictly prohibit to use any stuff instead of charge bar, Strictly prohibit your eyes close to
-
feeding tube in order to avoide accident.
