Rebel Toys ZAB0031, Оригинальное руководство пользователя

Страница: 7 / 17

12 13
EN EN
OPERATION
1. Hold the handlebar with both hands.
2. Place one foot on the round power pedal.
3. Then push the other leg back and place it on the scooter. Upon
reaching 5-6 km / h, a short beep will be heared and the engine will
start to drive the machine.
4. Maximum speed of the scooter is 12 km/h.
5. To stop engine, step off the power pedal.
6. To brake, press the brake with your foot.
7. A low battery is signaled by a series of beeps when trying to start the
engine.
BATTERY
1. Please be sure the battery has been fully charged before use.
Charge the battery when the battery indicator shows a low charge.
2. Never disassemble/modify the battery.
3. Do not use the device when it is charging!
4. Ensure the charging port is dry prior to charging!
5. Charge the vehicle only with the included/authorized power adapter.
6. Charge the battery after each use to keep it in optimum condition.
7. Do not charge the device in temperature below 5ºC or above 45ºC
CHARGING
1. Plug the charger into mains socket (110-240 V, 50/60 Hz). The light
on the charger lights up green.
2. Plug the other end of the charger into the vehicle. The indicator on
the charger will turn red. (otherwise, make sure the charger is
connected properly).
3. When the indicator turns from red to green, the charging is complete.
Disconnect charger from the device and power mains outlet.
4. Do not overcharge the device, as it may affect battery life.
IMPORTANT: Remember to close the rubber plug after the charging is
completed to ensure protection against water and dust ingression.
CLEANING AND MAINTENANCE
1. Do not clean this device when in the process of charging!
2. Clean the device with a soft, slightly damp cloth. Do not use any
chemical agents to clean this device.
3. Do not store the device unused for longer than 4 months without
charging as it may result in battery damage.
PRODUCT DESCRIPTION
INSTALLATION
1. With the scooter folded, pull the folding mechanism lever and lift the
fork up until you hear a click.
2. Lock the lever by tightening the folding mechanism lock.
3. Use an Allen key to attach the handlebar to the fork.
4. To adjust the height of the handlebar, release the handlebar height
adjustment lock, press down on the locking element and pull the
handlebar up or down.
5. After adjusting the height, tighten the handlebar height adjustment
lock.
6. To fold the scooter, release the folding mechanism lock and pull the
folding lever up.
1. Handlebar
2. Handle height adjustment lock
3. Folding mechanism lever
4. Folding mechanism lock 5. Charging port
6. Power pedal
7. Foot brake
1
2
3 4 5 6 7