Rebel MIE-RB-806R, Руководство пользователя

Страница: 9 / 20

EN
9
3. If LEDs 1 and 8 are on (one after the other), it means that
continuity is maintained.
Note: RC11 connector has 2 wires.
Checking DC voltage
1. Set the mode switch to SCAN position, press and hold
SELECT button until VERIFY LED will blink red.
2. Connect the crocodile wires to the circuit. If the STATUS
LED lights up red, it means that the red crocodile wire is
connected to the positive pole. If the STATUS LED lights up
green, it means that the red crocodile wire is connected to
the negative pole.
3. The light intensity of the STATUS LED corresponds to the
resistance.
SPECIFICATION
Main features
• Two crocodile clips
• RJ11 plug
• Buzzer
• Work light on the receiver
• Low battery level indicator
• Maximum distance of signal transmission: 3 km
• Maximum working current of emitter: <9 mA
• Maximum working current of receiver: <28 mA
• Emitters power: 9 V battery
• Receivers power: 9 V battery
• Emitters dimensions: 125 x 47 x 25 mm
• Emitters weight: 123 g
• Receivers dimensions: 172 x 36 x 25 mm
• Receivers weight: 91 g
• In set: emitter, receiver, earphones, carry pouch, owner's
manual