Rebel LUT0045, Руководство пользователя

Страница: 4 / 9

6 7 EN EN
OPERATIONS
Note: Before switching on the station for the first time, unscrew the 4 screws
marked with arrows on the bottom of the device.
Temperature settings:
1. Turn temperature control knob to set desired temperature.
2. Turn airflow control knob to set desired airflow volume.
Note:
• in the temperature range of 350 - 450°C, it is recommended to select the airflow
rate at the level of 3 – 8
• at temperatures above 450°C, the airflow should be set above level 4
• airflow of 1-5 is recommended for single nozzles
QFP Soldering
1. Connect the mains plug to a power socket. Cold airflow will turn on.
2. Assemble the desired nozzles into the position
Note:
Do not press the Nozzle or pull on the edge of the Nozzle by pliers. Also, do not
tighten the screw too tightly.
3. Turn on the power switch, set the air flow rate and temperature, and put the unit
on the racket.
4. Apply the proper quantity of solder paste and install the SMD on the PWB.
5. After operation, turn off the power switch and let the device cool down before
storing.
QFP Desoldering
1. Place the pick-up tool under the chip, choosing the appropriate width.
2. Put the nozzle on the pins of the IC (do not touch directly), so that the hot air can
melt the solder tin on the IC pin, and then use the tweezers to remove the IC.
3. After operation, turn off the power switch and let the device cool down before
storing.
Rated power input 320 W
Rated voltage range AC 220-240 V, 50 Hz
Air flow 24 l / min
Hot air temperature 150 - 500ºC
Sensor Thermoelectric cell
Dimensions 160 x 145 x 225 mm
Weight 3,9 kg
In set
4 nozzles, FP pick-up tool, user
manual
SPECIFICATION
LEARN MORE
For more information on this device visit: www.rebelelectro.com.
Read owner’s manual carefully before using your device.
Visit www.rebelelectro.com website for more products and accessories.
English
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment
(Applicable in the European Union and other European countries with separate collection systems) This marking
shown on the product or its literature, indicates that it should not be disposed with other household wastes at the
end of its working life. To prevent possible harm to the environment or human health from uncontrolled waste
disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable
reuse of material resources. Household users should contact either the retailer where they purchased this product,
or their local government office, for details of where and how they can take this item for environmentally safe
recycling. Business users should contact their supplier and check the terms and conditions of the purchase
contract. This product should not be mixed with other commercial wastes for disposal.
Made in China for LECHPOL ELECTRONICS Sp. z o.o. Sp.k., ul. Garwolińska 1, 08-400 Miętne.