Rebel KOM1081, Руководство пользователя

Страница: 5 / 11

8 9
EN EN
PRODUCT DESCRIPTION
CONNECTIONS
Note: No driver installation is needed, operating system will automatically
detect and configure the device.
1. Connect the USB plug to the USB port of your PC or laptop. The
RGB backlight on the headphones will turn on.
2. Connect the 3,5 mm jack (with headphones symbol on it) into the
headphone output of your PC or laptop to transmit sound.
3. Connect the 3,5 mm jack (with microphone symbol on it) into the
microphone input of your PC or laptop to transmit microphone
sound.
1. Microphone
2. Volume wheel
3. Microphone on/off switch
4. 3,5 mm headphones jack
5. 3,5 mm microphone jack
6. USB plug
3
2
4
1
6 5
SPECIFICATION
RGB lighting
Magnet: neodymium
Speaker size: 40 mm
Impedance: 30 Ohm ± 15%
S/N ratio: 60 dB
THD: 2%
Frequency response: 20 Hz - 20 kHz
Nominal input power: 20 mW
Maximum input power: 30 mW
Microphone: omnidirectional
Microphone sensitivity: -43 dB
Sensitivity: 105 dB ± 6 dB
Cable length: 1,8 m
Connections: 3,5 mm microphone jack, 3,5 mm audio jack, USB plug
Weight: 280 g
English
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
It is forbidden to place equipment waste marked with the symbol of a crossed-
out trash bin together with other waste. This equipment is subject to collection
and recycling. The harmful substances it contains can cause environmental
pollution and pose a threat to human health.
Made in China for LECHPOL ELECTRONICS Sp. z o.o. Sp.k., ul. Garwolińska 1,
08-400 Miętne.
OPERATION
1. Rotate the volume wheel to increase/decrease volume.
2. Use the switch to turn the microphone on/off.
LEARN MORE
For more information on this device visit: www.krugermatz.com.
Read owner's manual carefully before using.
Visit www.krugermatz.com website for more products and accessories.
In case of any doubts or questions reach out to our Frequently Asked
Questions section.