Rebel KOM1009, Руководство пользователя

Страница: 8 / 19

EN EN
14 15
7. Battery compartment (LCD)
8. DOWN button
9. UP button
10. SET button
11. MODE button
12. Temperature
13. Date
14. Day of the week
15. Time and alarm BATTERY INSTALLATION (LCD)
LCD display is powered with one CR2032 3 V battery.
Follow the below to install it correctly:
1. Use a coin or other similar object and insert it into
a notch on the battery compartment cover and
turn it anti-clockwise. Remove the cover.
2. Insert a CR2032 battery with correct polarization.
3. Put the cover back on place and turn it clockwise
until it locks in place.
Notes:
• Use only specified batteries.
• Remove
the battery from the battery
compartment if the device is not going be used
for a long period of time.
• Remove discharged battery from the battery
compartment immediately as to avoid leakage.
⑭
⑮
⑬
⑫
op
en
V S M
V
⑦
⑧
⑨ ⑩
⑪
OPERATION
Turning on/off
Press the touch button:
• once to turn on the device in 15% light mode.
• twice to enter 50% light mode
• three times to enter 100% light mode
• four time to turn off the device.
• hold for about 3 seconds to change the color
temperature
LCD display settings
Time and date
1. Press the SET button- when hour starts to flash,
press the UP/DOWN buttons to adjust.
2. Press the SET button again to save and move on
to minutes.
3. Repeat the above to set year, month and day.