Rebel TOOLS RB-1030, Руководство пользователя

Страница: 37 / 155

37 EN
4. Keep handles and grips dry, clean and free from oil and grease.
5. Hold power tool by insulated gripping surfaces, when performing an operation
where the cutting accessory may contact hidden wiring or its own cord. Cutting
accessory contacting a “live” wire may make exposed metal parts of the power tool
“live” and could give the operator an electric shock.
6. Do not use the power tool if the switch does not turn it on and off. Any power tool
that cannot be controlled with the switch is dangerous and must be repaired.
7. Disconnect the plug from the power source and/or the battery pack from the power
tool before making any adjustments, changing accessories, or storing power tools.
Such preventive safety measures reduce the risk of starting the power tool accidentally.
8. This power tool may be used by children who are above 8 years old and by persons
with reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, if they are supervised and guided by a person who is responsible for
their safety in a cautious manner for all the safety precautions being understood
and followed.
9. Store idle power tools out of the reach of children and do not allow persons unfamiliar
with the power tool or these instructions to operate the power tool. Power tools are
dangerous in the hands of untrained users.
10. Maintain power tools. Check for misalignment or binding of moving parts, breakage
of parts and any other condition that may affect the power tool’s operation. If
damaged, have the power tool repaired before use. Many accidents are caused by
poorly maintained power tools.
11. Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp
cutting edges are less likely to bind and are easier to control.
12. Use the power tool, accessories and tool bits etc. in accordance with these
instructions, taking into account the working conditions and the work to be
performed. Use of the power tool for operations different from those intended could
result in a hazardous situation.
Service
1. Have your power tool serviced by a qualified repair person using only identical
replacement parts. This will ensure that the safety of the power tool is maintained.
Additional safety warnings for jigsaws
• Keep hands away from the sawing range. Do not reach under the workpiece. Contact
with the saw blade can lead to injuries.
• Apply the power tool to the workpiece only when switched on. Otherwise there is
danger of kickback when the cutting tool jams in the workpiece.
• Pay attention that the base plate rests securely on the material while sawing. A
jammed saw blade can break or lead to kickback.
• When the cut is completed, switch off the power tool and pull the blade out of the
cut only after it has come to a complete standstill. Wait until the blade has come to a
complete stop before removing the blade from the workpiece. In this manner you can
avoid kickback and can place down the power tool securely.
• Always wait until the power tool has come to a complete stop before placing it down.
The blade can jam and lead to loss of control over the power tool.