Rearo, Loanbank House, Loanbank Quadrant, Govan, Glasgow, G51 3HZ
Tel: 0141 440 0800 Fax: 0141 445 3342 www.rearo.co.uk [email protected]
Accessories and Sealants
Important accessories to help with a
successful installation of Selkie Board
include:
Finishing Trims: designed specifically for
Selkie Board are available in satin silver,
polished chrome, white and black including:-
Internal Corner Profile, External Corner
Profile, End Cap,Quad End cap and
'H' section, for vertical application in
heights above 2400mm height.
Sealants and Adhesives: For best results
we recommend that Selkie Board is
installed using an external grade 'high grab
adhesive' such as GRIP FILL. This will
quickly secure the Selkie Board to the fixed
wall. For sealing of all profiles and trims we
recommend the use of a clear silicone
waterproof sealant.
If you are panelling an entire wall using
tongue and grooved* panels, we
recommend the use of Rearo colour
matched sealant for a seamless finish.
*Please see Tongue and Grooved installation guide.
Cleaning
Once installed, Selkie Board requires
minimal maintenance. Selkie Board should
be cleaned with warm water and a
nonabrasive mild detergent.
Scouring products or similar products
should not be used, and doing so may
invalidate your warranty.
FURTHER INFORMATION
For further information please contact your local rearo service centre, where our experienced team can
offer further advice regarding installation or maintenance.
Panseal Kit
Where it is identified that there may be a
risk of movement such as a flexible floor or
the possibility of settlement it maybe
appropriate to use a system such as
“Panseal”. The Panseal kit ensures that
the joint between the bottom of the Selkie
Board and the top of the shower tray is
secure and watertight. (fig 14)
Please see fitting instructions supplied with kit.
Fig14.
Apply Sealant to
areas as shown in
Panseal
instructions
Please be aware that these instructions are not exhaustive, if
you require further information, advice or are in any doubt as
to how to proceed please contact the Rearo technical team
on 0141 440 0800.
Please also note that for all installations there are some
general, simple guidelines which must be followed without
which our warranty would be invalidated including:
• all exposed edges of panels must be sealed.
• panels should never be fitted directly onto a shower tray
without adequate sealing. Please see instructions.
Dec 18
Rearo NORTHAMPTON
5 Rye Hill Close
Britannia Trade Park,
Northampton
NN5 7UA
T: 01604 212559
F:
Rearo SHETLAND
Staneyhill Gas Depot
North Road
Lerwick
Shetland Isles
ZE1 0QA
T: 01595 692807
F: 01595 695469
Rearo ROSYTH
Unit 15 & 16 Primrose Lane
Dunfermline Business Park
Rosyth
KY11 2RN
T: 01383 414000
F: 01383 414400
Rearo WASHINGTON
Unit 15, Tilley Road
Crowther Industrial Estate
Washington
Tyne & Wear NE38 0AE
T: 0191 482 2298
F: 0191 482 6245
Rearo Selkie Install 51218 .qxp_Layout 1 11/01/2019 14:48 Page 1