* Check Indicator Lights
Check indicator signal
connection,
To connect turn indicator
signal , press YES
<NO>
Move to the [Camera
Setup] screen,
Refer to next page
<YES>
Check turn signal wire
connection,
Turn off indicator light s and
press OK
<NO>
If both Left & Right arrows
are turned on , Press YES.
If only 1 arrow is turned
on , Press NO.
If both lights are off
– Press Yes
If one light is ON or both
lights are ON
– Press No
<YES>
Turn on Left indicator light ,
and check if the left arrow in
the display is On .
Press YES if the left arrow
light turns on
<YES>
The vehicle signal is
incompatible with product
signal.
Change the signal by
changing High/Low,
LOW→HIGH // HIGH→LOW
<NO>
* If only 1 arrow is on, check
the cable connection again .
* If both arrows are off ,
return to the turn signal
check screen②.
<YES>
Turn on Right indicator light ,
and check if the right arrow
in the display is On.
Press YES if the right arrow
light turns on
<NO>
Turn signal connection is
incorrect, check the cable
connection again.
Restart the procedure after
product turns off
<YES>
This Notice screen will
appear if the connection is
correct.
