Reverse With Confidence
™
5
•
Electric shock or product
malfunction may occur if this
product is installed
incorrectly.
•
Use this product within
the voltage range specified. Failure
to do so can cause
electronic shock or product
malfunction.
•
Take special care when
cleaning the monitor.
•
Make sure to firmly affix the prod-
uct before use.
•
If smoke or a burning smell
is detected, disconnect the
system immediately.
•
Where the power cable may touch
a metal case, cover the cable with a
friction tape. A short circuit
or disconnected wire may cause a
fire.
•
While installing the Rear View
System be careful with the wire
positioning in order to avoid wire
damage.
•
The Rear View System should only
be used when the vehicle is in
reverse.
•
Do not watch movies or
operate the monitor while driving;
as it may cause an
accident.
•
Do not install the monitor
where it may obstruct drivers
view or obstruct an air bag
device.
•
Dropping the unit may cause
possible mechanical failure.
INSTALLATION:
SAFET
Y INF
ORMA
TION
