Rear View Safety
14
BA
SIC FUNC
TIONS
When the system is turned on, a booting up logo will appear. If during
this process the car is put into reverse and a rear view camera is connected,
the logo will be interrupted and the system will enter into reverse mode. If
there is a video signal, the system will enter a standby mode. In this state,
short press the center button to turn the screen display on or off.
The mirror will enter reverse mode when the car is put into reverse. If a rear
view camera is connected, the monitor will turn on and the standby indicator
will disappear. If no rear view camera is connected, the monitor will remain
off and the standby indicator will remain. The mirror will remain in reverse
mode until the car is taken out of reverse.
Please note: There will be a short delay when switching between video views.
The front video images will be displayed during normal driving.
In case of sudden emergency braking, the rear video mirror will automatically
switch to the video behind the car. It will automatically return to the front
video after releasing the brake.
The views can also be switched manually by pressing the left, right, or middle
buttons.
