Rear View Safety
12
TROUBLESHOOTING
TROUB
LESHOO
TING
PROBLEM
SOLUTION
Monitor Displays
Blue Screen
(and/or) No
Signal Display
• Do a hard reset, unplug all cables leave out for
1 minute and then re-connect them
• Check to ensure that the connection to the
camera is tight.
• Verify camera cable is plugged into port labeled
Backup Camera
• Verify that the blue positive trigger on power
harness is put to power 12v+
If problem persists, verify that alternate ports
work. If alternate ports do not work, remove
Blue Trigger wire from 12V+ and select alternate
channel.
Monitor Will
Not Power-Up
(no backlight on
power button)
• Check fuse
• Check 12v+ to monitor
• Check ground connection
No Image
on Screen
• Verify camera is on correct camera input
• Verify cable is connected to monitor
• Verify camera is connected to cable
• Connect known working camera & cable to
monitor
• Verify Blue trigger is receiving power
No Audio
from Camera
• Verify chosen camera has audio
• Verify volume setting
