Rear View Safety
Reverse With Confidence
™
6
7
IN NO EVENT SHALL SELLER OR MANUFACTURER BE
LIABLE FOR ANY DIRECT OR CONSEQUENTIAL DAMAGES OF
ANY NATURE, OR LOSSES OR EXPENSES RESULTING FROM
ANY DEFECTIVE PRODUCT OR THE USE OF ANY PRODUCT.
Before drilling please check that no cable or wiring is on the other
side of the wall. Please clamp all wires securely to reduce the possi-
bility of them being damaged while vehicle is in use. Keep all cables
away from hot/moving parts and electrical noisy components.
We recommend doing a benchmark test before installation
to insure that all components are working properly.
Step 1: Choose the monitor and camera locations.
Step 2: Install all cables in vehicle, when necessary a 0.8 (20mm)
hole should be drilled for passing camera cable through vehicles
walls. Install split grommets where applicable.
Step 3: Once all cables and wiring have been properly routed, per-
form a system function test by temporarily connecting the system.
SAFET
Y INF
ORMA
TION
BEF
ORE Y
OU B
EGIN
If you have questions about this product, contact:
Rear View Safety
1797 Atlantic Avenue
Brooklyn, NY 11233
Tel: 1.800.764.1028
1. Monitor, cameras, and this transmitter system are high voltage. Only
professionals should open electronics. 2. Do not watch the video while
driving unless you are monitoring the rear view camera display.
Warning!
