realwear.com
89
HMT-1Z1 i.Safe Safety Instructions
Safety Instructions HMT-1Z1 model T1100S
Introduction
This chapter contains information and safety regulations which are to be observed without fail for safe operation of the
device under the described conditions. Non-observance of this information and instructions can have serious
consequences and / or may violate regulations.
Please read the manual and these safety instructions before using the device. In case of any doubt (in form of
translation or printing errors), the English version shall apply.
Application
ATEX & IECEx
The HMT-1Z1 model T1100S is approved for use in zone 1, zone 2, zone 21 and zone 22 in accordance with directives
2014/34/EU (ATEX) and the IECEx System.
NEC & CEC
The HMT-1Z1 model T1100S is approved for use in Division 1 and 2 Class I, II, III.
Manufacturer
i. Safe MOBILE GmbH i_Park Tauberfranken 10
97922 Lauda-Koenigshofen; Germany
Faults and Damages
Before entering ex-hazardous areas, the safety of the device must be checked.
If there is any reason to suspect that the safety of the device has been compromised, it must be withdrawn from use
and removed from any ex- hazardous areas immediately.
Measures must be taken to prevent any accidental restarting of the device. The safety of the device may be
compromised, if, for example:
•
Malfunctions occur
•
The housing of the device shows damage
•
The device has been exposed to excessive loads
•
The device has been stored improperly
•
Markings or labels on the device are illegible
•
Permitted limit values have been exceeded
We recommend that a device displaying errors or which an error is suspected be sent back to authorized service center
to be checked.