Assembly Instructions Page 5
11
11
K
U
Z
Carefully tilt ladder stand assembly forward so that the bottom
is facing forward and the rear is facing upward. With Horizontal
Jaw Assembly Strap passed through the top loop of Vertical
Jaw Assembly Strap , connect the two right/left ends of the
Jaw Assembly Strap to the Jaws using
2-M8x45mm
bolts .
Check to make sure that Vertical Jaw Assembl
Strap is passing through the metal loop on the bottom of the
Foot Platform Assembly (as shown above).
Z
U
U
K
E
E
strap passes
through this
metal loop
10
10
Attach Jaws to rear ends of Platform Frames
using
2-M8x75mm bolts with washers .
K
H
R
K
H
center spacers located here
Note: Nut
side up here
SIDE VIEW
K
K
G
75
75
Model: RTLS-503
15 Ft. Two-man Ladderstand
45
45
Customer Service Department 1-866-972-6168
www.primalvantage.com/realtree
11A
11A
NOTE: When fastening the Horizontal Jaw Strap
to the Jaws , the bolts must be inserted as follows.
Curved Jaw -
Insert
1-M8x45mm bolt
through
the Horizontal Jaw Assembly Strap fastener and then
through the top of the Curved Jaw .
Straight Jaw -
Insert
1-M8x45mm bolt
through
the Horizontal Jaw Assembly Strap fastener and then
through the bottom of the Straight Jaw .
U
K
K
K
45
45
From
bottom
Straight
Jaw
Curved Jaw
From
top
U
Z
Distributed by Acheson Harriman Swan, LLC, 2407 W. Euclid Ave., Littleton, CO 80120
©2021 (rev. 1/21)
