realspace 7500109, Инструкции по сборке и информация о гарантии

Страница: 14 / 81

Height Adjustable Function:
1. Press the " " button, the standing desk will rise up, press and hold to continue to rise.
2. Press the " " button, the standing desk will go down, press and hold to continue to drop.
Height Memory Function:
1. When the desktop is in a static state, press and hold the button "1" for three seconds, the buzzer will produce an
audible prompt, and the display shows "S-1", which means the save is successful. Then adjust the desktop to any
preferred height. Click the button (1) to return to the original memory height.
2. Buttons "2", "3" and "4" all have the same memory height function as button "1", just repeat the above steps.
Button
Up Button
Down Button
LED Display
Control Method
1.Button introduction:
There are six buttons, including " " , " " , "1" , "2" , "3" , "4"
(1) " ": Adjust the desk upwards
(2) " ": Adjust the desk downwards
(3) "1" : Position 1, first height position saved by the user
(4) "2" : Position 2, second height position saved by the user
(5) "3" : Position 3, third height position saved by the user
(6) "4" : Position 4, fourth height position saved by the user
Operating Instructions – Push-Button Hand Control
Reset Function:
1. When the height of the table does not match the actual height, the table needs to be reset and corrected.
Simultaneously press and hold the "3" and "4" buttons for five seconds to enter reset mode.
2. The display will show "RST ", after entering reset mode. At that time, press and hold the " " button to start reset.
The tabletop will rebound after reaching the lowest position. The reset is completed until 29.5" is showed on the display.
USB Charging Ports:
Integrated Output Ports ( 2 Type-A, 1 Type-C ports) will not work while desk is in motion or at reset state.
Anti-collision sensitivity adjustment - optional features:
1. Simultaneously press and hold the " " and " " buttons for five seconds to switch the sensitivity, one operation to
switch one level, divided into 4 levels, A-0, A-1, A-2, A-3
2. The display shows " " to indicate the anti-collision function is closed; the display shows " " to indicate high
sensitivity; the display shows " " to indicate medium sensitivity; the display shows " " to indicate low sensitivity.
3. When the desk goes up or down, it will rebound immediately when encountering obstacles.
14