Realm BY03-VBP-WTR, Инструкция по эксплуатации

Страница: 7 / 17

5
Technical data
SAFETY DEVICES
The unloader valve can reduce pressure if it
exceeds pre-set values.
Locking device on trigger gun (see illustration
at the beginning of this manual)! The trigger
gun features a locking device. When the knob
is activated, the trigger gun cannot be operated.
THERMAL SENSOR
A thermal sensor protects the motor against
overloading. The machine will restart after a
few minutes when the thermal sensor has
cooled.
Assembly
1. Position the washer as CLOSE as possible
to the water supply.
2. The washer must be used on a secure and
stable surface in a standing, upright position
(Fig.1).
3. Insert the gun holder and power cord holder
to the electric pressure washer unit(Fig.2).
4. Snap the spray lance into the trigger gun
and rotate it until the two parts are
completely locked. Then snap the nozzle
into the spray lance until they are
completely locked. (Fig.3)
Model
BY03-VBP-WTR
Motor Brush
Max. pressure 2400PSI
Max flow 1.75GPM
Current 14A
Voltage 120V~/60Hz
Max. Water Inlet
Temperature
104 º F/40 º C
Fig.3
Nozzle
Spray lance
Trigger gun
Gun
holder
Hook
Fig.2
Power
cord
holder