4
www.reallyrightstuff.com
3
INDEXABLE HANDLE
— An Arri-compatible Rosette locking design allows for
fine adjustment and superior load capacity. Loosening the T-Handle Lock Knob
allows you to adjust the position and rotation of your handle precisely where
you want it, then lock it down by tightening the knob. No tools are required to
swap the handle to the other side. When the Multi-Lock Swivel assembly is fully
disconnected from the head, pull out on the T-Handle Lock Knob to disengage
the screw shaft from the alignment groove in the bent tube. This allows the tube
to be flipped over to the other side of the Multi-Lock Swivel.
TELESCOPING HANDLE
— The telescoping carbon fiber handle with grip allows
for length adjustment of 13 to 21 inches. The diameter of the tube is 0.964 inches
or 24.5 mm. Use caution when clamping accessories on the carbon fiber tube to
avoid pinching and crushing the tube. Use band-style clamps where possible to
evenly distribute pressure around the tube.
TILT DAMPING ADJUSTMENT WHEEL
— Rotate wheel to adjust tilt damping.
Numbers align with index mark in multiple discrete positions to deliver 7 different
levels of damping. Damping ranges from Off (0) to High (7). There are no
intermediate settings between numbers.
LEVELING BASE
— Loosen the Leveling Base Knob to allow for fine leveling
adjustment up to 15°. Tightening the knob locks the fluid head’s position with
the stability of a 100mm bowl.
Note that continuing to rotate the knob in the
loosening direction will remove it and allow the fluid head to be removed from the
tripod. Also, ensure there is sufficient thread engagement for the load before use.
FOLDING COUNTERBALANCE ADJUSTMENT CRANK ARM
— Unfold the crank
arm by first pressing the stainless steel unlock button located on one side, then
flipping the crank arm into the locked position. Once unfolded, rotate the Crank
Arm clockwise to increase the counterbalance restoring torque. Decrease the
counterbalance restoring toque by rotating the Crank Arm in the counter-clockwise
direction.
PAN DAMPING ADJUSTMENT WHEEL
— Similar to the Tilt-Damping Adjustment
Wheel, rotate the Pan Damping Adjustment Wheel to change the level of fluid
damping. There are no intermediate settings between numbers.
TILT LOCK LEVER
— Rotate the Tilt Lock Lever toward the direction of the Lock
symbol near the arrow to lock the fluid head’s tilt axis at any position. Loosen the
tilt axis by rotating the lever the opposite direction.
Note that the lever is captive
and is factory set with the proper amount of clamping force. User adjustment
is not required.
ALLEN KEY STORAGE
— Store the provided Allen Key (used to attach and detach
plates from the camera) within the Quick Release Clamp. Magnets hold the Allen
Key in place while not in use.
QUICK-RELEASE CLAMP
— Lever-release clamp* accepts all Really Right Stuff-
compatible plates and rails.
2
3
4
5
6
7
8
FEATURES
REAR VIEW
1.
Indexable handle
2.
Telescoping handle
3.
Tilt Damping Adjustment Wheel
4.
Leveling Base
5.
Folding Counterbalance Adjustment Crank Arm
6.
Pan Damping Adjustment Wheel
7.
Tilt Lock Lever
8.
Allen Key Storage
9.
Quick-Release Clamp
10. Clamp Lever
11.
Top-Load Release Button
12.
Spirit Level and Light
13. Precision Laser Markings
14. Pan Lock Lever
1
1
2
3
4
5
6
7
8
9
*Other brand plates listed as Arca-Swiss compatible may also fit but only mounting plates made by RRS are guaranteed to our
50 lbs. no-slip rating. Oversized dovetail plates can permanently damage the clamp if forced to close. Contact RRS Customer
Service prior to using a non-RRS plate to verify compatibility and use.
9
