REALINN RL3200DB, Руководство пользователя, Страница: 12 / 45

8
Step 3 . Unplug the USB receiver and then insert the USB receiver into
the USB port of computer again.The scanner beeps “ di “two times
at lowest frequency, indicate that the scanner connect to computer
successfully.
Step 4 . Scan “ Instant upload mode” code to allow the scanner to
upload barcodes to host instantly.
Instant upload mode
Step 5 . Open the Notepad or Word in the Host, put the cursor on the
blank. Read labels for testing. When scanner decodes successfully
r,the scanner will beeps once and vibrates once.
( The beeper and vibration indication can be turned off. See Decoding
Volume Setting on page 18 and Vibrate setting on page 19 )
Note 1:
If fail to connect the scanner to computer, please unplug
the mini USB receiver and then plug the USB receiver into the USB
port again, repeat the connection steps above.
Note 2:
If you want to switch the connection mode back to
Bluetooth mode, please press the Button 3 for 1 second or
scan“Bluetooth HID”and ”Pairing ”in order.
See Button Function Instruction on page 3 or “ Bluetooth
Pairing”on page 5.
Note 3:
If the scanner is not paired with the USB receiver within 1
minute, it will exit the the pairing status automatically.
The setup codes scanning is not working when the scanner is in
wireless pairing status.