Robert H Peterson Co. Model: VR-2A
9-9-20 Page 2
ROOM
LCD - Liquid Crystal Display
TEMP
1
2
3
SET
4
5
6
1.
DISPLAY
Indicates CURRENT room temperature .
2.
0
F OR
0
C
Indicates degrees Fahrenheit or Celsius.
3.
FLAME
Indicates burner/valve in operation.
4.
ROOM
Indicates remote is in THERMO operation.
5.
TEMP
Appears during manual operation.
6.
SET
Appears during time of setting the desired
temperature in the thermo operation.
SETTING °F / °C SCALE
The factory setting for temperature is
°
F. To change this setting to
°
C press the ON/HI key and
the LO/OFF key on the transmitter at the same time this will change from
°
F to
°
C. Follow this
same procedure to change from
°
C back to
°
F.
TEMP
TEMP
TEMP
OFF OPERATION
3UHVVDQGKROGWKH/22))NH\XQWLOWKHDSSOLDQFHÀDPHUHDFKHVWKH
GHVLUHÀDPHKHLJKWRUFRPSOHWHO\VKXWVRII'XULQJWKLVWLPHWKH/&'
screen will show LO, after 3 seconds the LCD screen will default to
display room temperature and the word TEMP will show.
MANUAL FUNCTION
To operate the system in the manual “MODE” do the following.
ON OPERATION
3UHVVDQGKR,NH\XQWLOWKHDSSOLDQFHÀDPHWXUQV21DQG
UHDFKHVWKHGHVLUHGÀDPHKHLJKWRULVDWIXOORQ'XULQJWKLVWLPHWKH
LCD screen will show HI, after 3 seconds the LCD screen will default to
display room temperature and the word TEMP will show. (Flame icon will
appear on LCD screen in manual on mode)
TEMP
SET
ROOM
TEMP
THERMOSTAT FUNCTION
SETTING DESIRED ROOM TEMPERATURE
This remote control system can be thermostatically controlled when the
transmitter is in the THERMO mode (The word
ROOM must be displayed on
the screen
). To set the THERMO MODE and DESIRED room temperature,
Press the
MODE
key until the LCD screen shows the word
ROOM
, then the
remote is in the thermostatic mode.
Press and hold the
SET
key until the desired set temperature is reached. (By
pressing and holding the set key the LCD screen set numbers will increase from
45° to 99° then restart over at 45° ) Next release the
SET
key. The LCD screen
ZLOOGLVSOD\WKHVHWWHPSHUDWXUHIRUVHFRQGVDQGWKH/&'VFUHHQZLOOÀDVKWKH
set temperature for 3 seconds, then the LCD screen will default to display the
room temperature.
f i r e - p a r t s . c o m