PRE-USE INSTRUCTIONS
!
WARNING
Before using this fireplace, make sure you have read, understand, and are following all information
provided in this manual. Failure to follow these instructions could cause property damage,
serious injury, or death.
Checking for Leaks
1.
Make a leak check solution by mixing 1 part dishwashing soap with 3 parts water in a spray bottle.
2.
Make sure the control knob on the fireplace is in the “OFF” position, then connect your
fireplace to the LP gas tank and turn the tank’s valve on.
3.
Spray the leak solution on the valve connections, paying particular attention to the areas
indicated by arrows in the diagrams below.
4.
If bubbles appear, turn the LP gas tank off, disconnect the tank, and inspect all connections,
making sure threads are clear of debris. Reconnect the LP gas tank and retest. If you continue
to see bubbles, turn the LP gas tank off. Disconnect the hose and call Real Flame Customer
Service at 1-800-654-1704 for assistance.
5.
If no bubbles appear after 1 minute, wipe away excess leak solution and proceed to
“Lighting Instructions.”
Pay close attention to the areas indicated by the arrows.
10
Содержание 840LP
Страница 7: ...7 ASSEMBLY INSTRUCTIONS Install the AAA battery as shown in the diagram below 3 1 2 x 8 8 x4 x1...
Страница 25: ...7 INSTRUCTIONS D ASSEMBLAGE Installer la pile AAA comme indiqu sur le sch ma ci dessous 3 1 2 x 8 8 x4 x1...
Страница 43: ...7 INSTRUCCIONES DE ENSAMBLAJE Instale la bater a AAA como se indica en el diagrama que sigue 3 1 2 x 8 8 x4 x1...
