Realfiction Dreamoc, Руководство пользователя

Страница: 7 / 13

6
To start using the Dreamoc
You simply plug it into the power outlet. AC 100-240V, 50-60 Hz, 240W. Wait
about 20 seconds. The Dreamoc is delivered with a pre-installed movie (
6 ),
which will start automatically. The Dreamoc can operate 24/7, but if you would
like to turn off the power, open the back of the Dreamoc. This is done using
the key supplied with the Dreamoc. Inside you will find a switch on/off button
(
7 ).
To place a physical object in the Dreamoc
When you would like to place a physical object inside the pyramided shaped
optic, you open the backdoor with the key supplied with the Dreamoc, open
the hatch (
5 ) to the chamber, and place the object inside.
To change the film content on the Dreamoc
Start by turning off the power ( 7 ). You then open the back of the display with
the key supplied with the Dreamoc. You can now see the compact flash card
in the player (
6 ). To exchange the card, take out the first flash card and insert
the new card in the player with the label facing upwards. Do not use
excessive force when inserting the card. Afterwards you close the Dreamoc
and turn on the power (
7 ). Wait about 20 seconds and the Dreamoc will start
showing the new content.
!!! We recommend keeping a backup copy of your Dreamoc content, either on
a computer or on a backup CF card.
To clean the Dreamoc
The transparent pyramid shaped optic is made of plastic and should only be
cleaned with a damp soft cotton cloth moistened with water to avoid scratches
on the surface. The surface is hard coded, but will still need to be handled
with care.
!!! We recommend that you only use regular PH neutral water. Avoid using
chemicals and sponges. Never use stump objects to remove dirt from the
optic.
Connecting the Dreamoc to externals (from series 3)
The Dreamoc can be connected to the internet, for remote access and/or
automated content updating features. It is also possible to connect external
speakers, as well as interactivity accessories such as touch buttons and
proximity sensors. These connections can all be reach through the small wire
hatch (
3 ) in the bottom of the Dreamoc housing.