background image

•  The surface of the system will be slightly warm when using, but this does not indicate a fault.

•  Do not expose the Dreamoc POP3B to soot or steam. Thick soot or steam could damage the electri-

cal components and cause malfunctions.

•  Keep the memory card, keys, screws and all accessories out of reach of children to prevent swal-

lowing.

•  Only use attachments/accessories specified by the Realfiction

•  Refer all servicing to qualified service personnel. Servicing is required when the unit has been 

damaged in any way, such as: if the power-supply cord or plug is damaged, if liquid is spilled onto 

or objects fall into the unit, if the unit is exposed to rain or moisture, or if the unit does not operate 

normally or has been dropped.

Cleaning

•  The transparent optic is made of glass and should normally only be cleaned with a dry soft fine 

fiber cloth supplied with the product.

•  The optics surface is hard coded, but still it need to be handled with care, and do not use general 

glass cleaner liquid and the coded side (outside) of the optics, this can cause damage to the coded 

layer on the optics.

•  If the optics have dirt on the coded side (outside) that is difficult to remove wipe carefully with a 

moistened fine fiber cloth with pure water or alcohol to wipe and remove the surface dirt slowly.

•  If the optics have dirt on the non-coded side (inside) it can be cleaned with general glass cleaner 

liquid.

•  Never use stump objects to remove dirt from the optic.

•  The wooden housing can easily be cleaned with a damp cloth.

•  NOTE: Do not use chemicals, cleaning substances, sponges etc. Only use the cloth which comes 

with your new product. 

6

Transportation

•  During transport of the Dreamoc POP3B it is recommended to use the standard packing material 

that the product was received in and packed exactly the same way as when the product was re-

ceived. If the product are packed in a different way during transport, it might cause damages to the 

product during transport.

Storages

•  Room temperature 25 deg Celsius, humidity 60% ventilated

Содержание DREAMOC POP3B

























Отзывы: