CHAPTER 2
:
Important Safety Instructions
Before getting started
• Read this user manual and follow the instructions.
• Installation of the Dreamoc must be done according to this user manual, and must be performed by
an adult (Over 21 years).
Placement
• The Dreamoc must be placed on a horizontal, stable and plane surface. The floor stand must be
fitted with sufficient ballast.
• Do not install the Dreamoc in narrow passageways or other places where a lot of people and equip-
ment has to pass close by, thereby risking collisions that might cause the Dreamoc to tip over caus-
ing human injuries and damage to property.
• No sand or dust! Fine sand or dust entering the system could cause malfunctions or defects.
• No water or oil! Water or oil entering the system could cause electric shock, malfunctions or de-
fects.
• Be careful of unusual ambient temperature. Using the system in a place where the temperature is
over 40°C (140°F) or lower than 0°C (32°F) may result in malfunction.
• Do not place the Dreamoc in direct sunlight or near magnetism, corrosive gas or ultrasonic humidifi-
er. This could cause malfunction.
5
Operation
• The Dreamoc must be connected to a power outlet with current and voltage as described in the
product marking.
• Turn off the power to the Dreamoc before opening the top lid or changing the SD card.
• Unplug this unit when unused for long periods of time.
• Do not block any ventilation openings. Install the unit in accordance with the instructions.
• During service and cleaning the Dreamoc must be turned off, and the power plug removed from the
outlet. To disconnect the apparatus from the mains, the plug must be pulled out from the mains
socket, therefore the mains plug shall be readily operable.
• Handle the liquid crystal display (LCD) with care. The LCD is a very delicate display device: Do not
press its surface with excessive force, hit it or prick it with a sharp object.
